Emulex LP1005DC-CM2 Bedienungsanleitung PDF herunterladen (Seite 56)

Driver for Linux - Configuration Section Page 50

Boot Code

Boot code allows you to designate a Fibre Channel drive as the boot device. Linux supports three types

of boot code: x86 BootBIOS for x86 systems, OpenBoot for PowerPC systems and EFIBoot for Intel

Itanium IA64 systems.

Load Boot Code Using HBAnyware

Prerequisites

• The Emulex driver for Linux is installed properly.

• HBAnyware has been installed properly.

• The boot code file (x86 BootBIOS, OpenBoot or EFIBoot) has been downloaded from the

Emulex Web site and extracted to a directory on your local hard drive.

Procedure

To load boot code using HBAnyware:

1. Start HBAnyware: su to root and run the following script:

/usr/sbin/hbanyware/hbanyware

2. In the property tabs (right pane), select the Firmware tab. If the current version of boot code is

displayed in the Boot BIOS Message field, you do not need to load boot code – skip to step 6.

Otherwise, continue with step 3.

Figure 25: HBAnyware utility, Firmware Tab

3. On the Firmware tab, click Browse. The Select Firmware File browse window is displayed.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 161 162

Keine Kommentare

Emulex LP1005DC-CM2 Bedienungsanleitung Seite 56