Emulex 110 Installationsanleitung PDF herunterladen (Seite 73)

Booting from the external storage array

Installation and Configuration

21. Press Esc to return to the configuration screen shown in Figure 53

on page 72.

22. Select 3 (PLOGI Retry Timer) and press Enter.

This displays a window similar to Figure 55, which shows the

default setting of NO RETRYs.

Figure 55 Setting the PLOGI retry timer

23. The PLOGI retry timer specifies the amount of time following

port reset the adapter will wait to log in again and rescan the bus

devices. Setting a value of 50 msec allows a retry interval of 50

milliseconds for login and rescan functions to complete. A setting

of 50 msec will take five to six seconds per device found on the

bus.

Select 50 msec and press Enter.

24. Press Esc to return to the configuration screen shown in Figure 51

on page 70.

25. Select 3 (Configure Boot Parameters) and press Enter.

This displays a window similar to Figure 56 on page 74.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 239 240

Keine Kommentare

Emulex 110 Installationsanleitung Seite 73