Emulex 110 Installationsanleitung PDF herunterladen (Seite 36)

EMC Host Connecivity with Emulex Fibre Channel HBAs and CNAs in the Windows Environment

Installation and Configuration

Figure 9 Selecting the adapter to load

The utility verifies the file and performs the firmware upgrade.

Once complete, the menu at the top of the screen might have

disappeared. If so, press Alt-L again to retrieve the menu.

4. Repeat steps 2 and 3 to load firmware to any other adapters.

5. Once your adapters are upgraded, press Alt-F to open the File

menu, and select Exit to quit the LP6DUTIL.EXE tool.

If you are also loading a boot BIOS to your adapter(s), steps 2 and

3 apply. Using the download technique, ensure that the correct

boot BIOS file is selected for your adapter.

Enabling/disabling the boot BIOS

Once the boot BIOS is loaded to the adapters, it is enabled by default.

If it is not enabled, the adapter is unconfigurable for external boot.

To enable or disable the boot BIOS on your adapter:

1. Press Alt-L to open the Flash menu.

2. Select Display Flash.

3. Verify the adapter has a valid boot BIOS image loaded. Then

press Esc to close the Flash Load List window.

4. Press Alt-L to open the Flash menu.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 239 240

Keine Kommentare

Emulex 110 Installationsanleitung Seite 36