Emulex 110 Installationsanleitung PDF herunterladen (Seite 234)

234

EMC Host Connecivity with Emulex Fibre Channel HBAs and CNAs in the Windows Environment

Troubleshooting

◆ For servers booting from the array, a Symmetrix out-of-family

microcode load, or a VNX series for block or CLARiiON FLARE

NDU between versions will cause the server to require a reboot.

This occurs because Windows requires a reboot when

characteristics of the boot LUN change. During the NDU process

on EMC storage arrays, the serial number and inquiry VPD data

will change to reflect the new code version. When Windows

performs a rescan and recognizes this change, it assumes a

change has occurred on the boot LUN and will require a reboot.

◆ STORPort 1.20a3 and HBAnyware 3.0 after the FC Port

installation or update.

Although not recommended, running multiple Emulex drivers on

the same server may be supported by your OEM vendor. The

Emulex adapter applications installed with a new driver will

supersede previously installed Emulex adapter applications. In

some cases, the local management utility (lputilnt or elxcfg) for a

previously installed driver will be removed and not superseded.

In this case, HBAnyware can be used to manage the previously

installed driver on the local server.

Installing or updating FC Port on a server with STORPort

Miniport 1.20a3 installed will cause management problems with

adapters that use STORPort Miniport. In this case, it will be

necessary to reinstall STORPort Miniport 1.20a3 and HBAnyware

3.0 after the FC Port installation or update.

1 2 ... 229 230 231 232 233 234 235 236 237 238 239 240

Keine Kommentare

Emulex 110 Installationsanleitung Seite 234