Emulex 110 Installationsanleitung PDF herunterladen (Seite 47)

Booting from the external storage array

Installation and Configuration

Figure 23 Saved boot devices with WWN of array port

19. Press X to exit the BIOS utility.

When prompted to reboot the system, press Y.

During the subsequent reboot, the Emulex BIOS banner screen

shows the array and LUN that has been specified as a

boot-capable LUN.

At this point, the OS Installation can begin using this LUN as the boot

volume.

Updating ada pter firmware from Emulex EFI-BIOS utility

1. Prior to booting the server, ensure that media (USB memory

drive, CD-ROM, or diskette) that contains the Emulex EFI boot

code/utility you downloaded earlier is physically present in the

system.

2. Following POST of the server, the Firmware Boot Manager menu

(Figure 24 on page 48) appears. Using the arrow keys, select EFI

Shell and press Enter.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 239 240

Keine Kommentare

Emulex 110 Installationsanleitung Seite 47