Emulex 110 Installationsanleitung PDF herunterladen (Seite 68)

EMC Host Connecivity with Emulex Fibre Channel HBAs and CNAs in the Windows Environment

Installation and Configuration

8. The EFI shell includes a driver configuration utility, accessed via

drvcfg, which configures supported drivers. To configure the

Emulex-specific driver, type drvcfg -s driverhandle (where

driverhandle refers to the driver handle listed for the Emulex

driver in the output of the drivers command, described above)

and press Enter. (In Figure 47 on page 67, the driver handle is 8C,

so the command entered is drvcfg -s 8C.)

The Emulex EFI BIOS configuration utility (Figure 48) appears.

Figure 48 EFI BIOS configuration utility

9. Select the number of the adapter instance that corresponds to the

adapter to be used for boot and press Enter.

Note: If multiple adapters are installed, there will be multiple adapter

entries. The order of the adapter instances listed is the order they will be

scanned for a boot device; this does not necessarily correspond to PCI

slot numbering. In Figure 48, adapter entry 001 is used for boot.

A window similar to on page 69 appears.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 239 240

Keine Kommentare

Emulex 110 Installationsanleitung Seite 68