Emulex 110 Installationsanleitung PDF herunterladen (Seite 198)

198

EMC Host Connecivity with Emulex Fibre Channel HBAs and CNAs in the Windows Environment

Miscellaneous Planning and Procedures

◆ EMC fabric with EMC PowerPath/ATF

(InitLinkFlags=0x00000002 (fabric, auto-link speed),

WaitReady=10, LinkDown=10)

ELXCFG.EXE v1.41a5 ELXCFG.EXE has the same settings as v1.41a4,

and is packaged with the 2.13a4 driver.

ELXCFG.EXE v1.41a6 enables adapter settings to connect to a

Symmetrix, VNX series, or CLARiiON from the same host while

using the same adapter. This version is distributed separately, and is

labeled EMC universal configuration tool for Symmetrix, VNX

series, or CLARiiON. To enable custom EMC array configuration

settings, a user must start the utility with a command line option of --

emc. Refer to “Updating the shortcut” on page 203.

The EMC array auto-configuration settings are no longer presented

automatically as the configuration tool will no longer auto-detect if

an EMC array is present on the fabric. If the -- emc option is enabled,

the configuration tool will automatically mask some of the checkbox

selections, and will present a four-choice EMC array

auto-configuration dialog box under the Configuration-Set menu.

These settings noted below are modified for the global driver defaults

and apply to all adapters in the system. This enables the same

adapter to connect to a Symmetrix, VNX series, or CLARiiON from

the same host while using the same adapter.

The EMC choices will reset the link-speed to Auto. Manually

modifying the link-speed later will no longer remove the checkbox

from the EMC auto-configuration choices.

All adapter global settings are Emulex defaults, with the exception of

the following:

◆ MaximumQueueDepth=32, MaximumLun=255,

UniqueNodeWwns=1,

ShowUnknowns=1, MultipleScsiClaims=1, BrokenRscn=1,

NameServerDelay=1500ms, Windows Disk Class Driver

Timeout=60s

◆ EMC arbitrated loop without EMC PowerPath/ATF

(InitLinkFlags=0x00000000 (arbitrated loop, auto-link speed),

WaitReady=45, LinkDown=45)

◆ EMC arbitrated loop with EMC PowerPath/ATF

(InitLinkFlags=0x00000000 (arbitrated loop, auto-link speed),

WaitReady=10, LinkDown=10)

1 2 ... 193 194 195 196 197 198 199 200 201 202 203 ... 239 240

Keine Kommentare

Emulex 110 Installationsanleitung Seite 198