Emulex 110 Installationsanleitung PDF herunterladen (Seite 192)

192

EMC Host Connecivity with Emulex Fibre Channel HBAs and CNAs in the Windows Environment

Miscellaneous Planning and Procedures

Editing the Windows time-out value

Note: This section applies only to driver version 2.11a2 and below; driver

versions above 2.11a2 include a version of the Emulex Configuration Tool

that automatically updates the Windows I/O time-out value.

Connecting a Windows 2000 host to an EMC storage array over Fibre

Channel requires editing the Windows registry as follows:

1. Open the registry:

a. On the Windows taskbar, click Start.

b. Click Run.

c. Type regedt32.exe in the Open field and click OK.

2. Follow this path:

HKEY_LOCAL_MACHINE\System\CurrentControlSet\

Services\Disk

3. Look for the TimeOutValue entry in the right pane of the registry

editor window:

• If the TimeOutValue exists, double-click it, then go to step 4.

• If the TimeOutValue does not exist:

a. Select Add Value from the Edit menu.

b. In the Value Name box, type TimeOutValue (exactly as

shown).

c. For the data type, select REG_DWORD from the

pull-down menu.

d. Click OK, then go to step 4.

4. In the DWORD Editor window:

a. Click decimal in the radix box.

b. Change the value in the data box to 60.

5. Click OK.

6. Close the registry editor.

7. Reboot the host.

1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 239 240

Keine Kommentare

Emulex 110 Installationsanleitung Seite 192