Emulex LP9002S Bedienungsanleitung PDF herunterladen (Seite 7)

Emulex LP9002 Configuration Guide

Page 7

Num-iocbs 1024 2048 2048

Num-bufs 1024 1024 1024

topology 4 2 2

Ip-class 3 3 3

Fcp-class 3 3 3

Use-adisc 0 0 0

Rscn-adisc 0 0 0

Fcpfabric-tmo 0 0 0

Post-ip-buf 128 128 128

Dqfull-throttle 1 1 1

dqfull-throttle-up-time 1 1 1

dqfull-throttle-up-inc 1 1 1

zone-rscn 0 1 1

rscn-ns-delay 0 0 0

ack0 0 0 0

class-code 0x00020000 0x00020000 0x00020000

use-lomempages 0 0 0

link-speed 0 0 0

The following example binds HBA instance lpfc0 to SCSI target 16 from Symmetrix

FA 5000123456789abc and instance lpfc1 to SCSI target 17 from Symmetrix FA

5000123456789def.

fcp-bind-WWNN = "5000123456789abc:lpfc0t16”,

"5000123456789def:lpfc1t17”;

7 Configuring the sd.conf

The target and LUN entries in the /kernel/drv/sd.conf relate directly to the persistent

binding entries in the lpfc.conf or lpfs.conf HBA driver configuration file. The fcp-bin-

WWNN lines in lpfc.conf or lpfs.conf relate to the HBA instance and the SCSI target

that is being persistently bound to it. See below for an example showing three LUNs

for two HBAs

Emulex LP9002L-E (PCI) HBA:

name=”sd” parent=”lpfc” target=16 lun=0 hba=”lpfc0”;

name=”sd” parent=”lpfc” target=16 lun=1 hba=”lpfc0”;

name=”sd” parent=”lpfc” target=16 lun=2 hba=”lpfc0”;

name=”sd” parent=”lpfc” target=17 lun=0 hba=”lpfc1”;

name=”sd” parent=”lpfc” target=17 lun=1 hba=”lpfc1”;

name=”sd” parent=”lpfc” target=17 lun=2 hba=”lpfc1”;

Emulex LP9002S-E (SBus) HBA:

name=”sd” parent=”lpfs” target=16 lun=0 hba=”lpfs0”;

1 2 3 4 5 6 7 8 9 10 11

Keine Kommentare

Emulex LP9002S Bedienungsanleitung Seite 7