Emulex LP21000 Bedienungsanleitung PDF herunterladen (Seite 242)

The OneCommand Manager User Manual Page 232

SetTargetLoginProperties

Supported by: Windows, Solaris, Linux and VMware ESX

Syntax:

hbacmd [h=host_IP[:port] | hostname[:port]] SetTargetLoginProperties

<MAC_Address> <iscsi_target_name> [ImmediateData=<0|1>] [HeaderDigest=<0|1>]

[DataDigest=<0|1>] [Auth=<0|1|2> "TgtCHAPName" "TgtSecret" "InitCHAPName"

"InitSecret"]

Description: This command sets the login and authentication properties associated with a specific

target. This command requires that you specify a valid iSCSI target name <iscsi_target_name>. If

you do not specify some of the remaining properties, these options are set to their default values.

However, if no properties are changed, an error is generated. You must change at least one property for

this command to return successfully. When you set the authentication method <Auth> to a value other

than 0, you must set additional parameters to specify the initiator CHAP name, target CHAP name, and

initiator and target secret strings. Each string should be enclosed in quotations to avoid mishandling by

the Windows, Linux, Solaris, or VMware shell's parser.

Example:

hbacmd SetTargetLoginProperties 00-11-22-33-44-55 iscsitarget Auth=1

"TgtCHAPName" "TargetSecret1"

If you set the authentication method to "Mutual CHAP (value of 2)", you must also specify all 4 values.

Example:

hbacmd SetTargetLoginProperties 00-11-22-33-44-55 iscsitarget Auth=2

"TgtChapName" "TargetSecret1" "InitCHAPName" "InitialSecret1"

Parameters:

MAC_Address - MAC address of the CNA port

iscsi_target_name - Target’s iSCSI name enclosed in quotes (string length:11-255)

ImmediateData -

0 = No

1 = Yes (default: 1)

HeaderDigest -

0 = None

1= CRC32C (default: 0)

DataDigest -

0 = None

1= CRC32C (default: 0)

Auth -

0 = None

1= One-Way CHAP

2 = Mutual CHAP (default: 0)

TgtCHAPName - Target CHAP name enclosed in quotes (string length: 1-255)

1 2 ... 237 238 239 240 241 242 243 244 245 246 247 ... 273 274

Keine Kommentare

Emulex LP21000 Bedienungsanleitung Seite 242