Emulex LP982 Bedienungsanleitung PDF herunterladen (Seite 31)

Removing a Previous 7.x Version of the Driver

Note

This section describes how to remove a previous

installation of an earlier driver. The Emulex 7.1 lpfc.conf file

removes several configuration parameters from previous

versions. Do NOT replace the current lpfc.conf with lpfc.

conf.c or lpfc.conf.defs or lpfc.conf from a previous non 7.x

series release. With the 7.1 driver, all configuration

parameters are set in the /etc/lpfc.conf file. There is no lpfc.

conf.c or lpfc.conf.defs file present in the 7.1 release. To

reuse an old configuration, you must backup the previous

lpfc.conf.defs, lpfc.conf and lpfc.conf.c file and merge

configuration in these files to /etc/lpfc.conf file after

installing the new driver and before building the new driver.

Note

Driver installation or removal does not save the

configuration files (i.e. lpfc.conf, lpfc.conf.c or lpfc.conf.

defs) from previous installations. If you customized any of

these files, we recommend that you copy them to another

location so that you have a record of the changes.

To completely remove a previous 7.x version of the driver:

1. Log on as 'root'.

2. If possible, exit all applications that use Fibre Channel-attached drives, then

unmount the drives. If you cannot exit all applications that use Fibre Channel-

attached drives, the uninstall will work properly, but you must reboot after the

uninstallation is complete.

3. Stop HBAnyware. Type:

cd <path>./

stop_hbanyware

The script is located in the /usr/sbin/hbanyware directory.

4. Remove previous installations of HBAnyware. Type:

rpm -e

HBAnyware

Emulex Documentation, Drivers and Software

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 370 371

Keine Kommentare

Emulex LP982 Bedienungsanleitung Seite 31