Emulex LP982 Bedienungsanleitung PDF herunterladen (Seite 20)

Installing the Application Helper Module

The ioctl-install script installs the lpfcdfc driver RPM. This RPM installs the driver sources

to the /usr/src/lpfcdfc directory, builds a driver for the currently running kernel, and then

installs the driver to the proper directory for the currently running kernel.

The 'elxlpfc' init script is also installed and configured to start and stop the 'lpfcdfc' driver

during system startup and shutdown.

Note

The HBAnyware™ and LightPulse™ (lputil) utilities are

bundled together and must be installed separately from the

driver. Refer to the "Installing the Utilities" section of this

manual for more information.

To install the Emulex driver for Linux:

1. Install a supported Emulex host bus adapter in the system. Refer to the adapter's

Installation manual for specific hardware installation instructions.

2. Download the driver from the Emulex web site or copy it to the system from the

installation CD.

3. Log on as 'root' to a terminal, and unpack the tarball with the following command:

tar xzf lpfc_2.4_ioctl_module_kit-<module version>.tar.gz

4. Change the directory to the directory that is extracted:

cd lpfc_2.4_ioctl_module_kit-<module version>/

5. Execute the ioctl-install script with no options to install the new driver kit. Type:

./ioctl-install

Once the ioctl-install script has completed successfully, the Emulex lpfcdfc driver is

loaded, and Fibre Channel disks that are properly connected to the system are

accessible.

Emulex Documentation, Drivers and Software

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 370 371

Keine Kommentare

Emulex LP982 Bedienungsanleitung Seite 20