Emulex LP9802DC Bedienungsanleitung PDF herunterladen (Seite 25)

Driver for HP-UX - Troubleshooting Section Page 22

lpfcN: 5: Unknown ELS [command response iocb]

DESCRIPTION: An ELS command, ELS response, or ELS ring IOCB are not supported or have an

illegal value. The illegal / unknown value is recorded.

LOG: ERROR always fcelsb.c

ACTION: This error could indicate a software driver or firmware problem. If problems persist report

these errors to Technical Support.

lpfcN: 6: FARP-[REQ RSP] received

DESCRIPTION: A FARP ELS command was received from a Fabric. The command originator's PortID

is recorded.

LOG: WARNING IP verbose fcelsb.c

ACTION: none needed.

lpfcN: 7: FLOGI completes successfully

DESCRIPTION: A Fabric Login completed successfully. The assigned PortID, R_A_TOV and

E_D_TOV are recorded.

LOG: WARNING DISCOVERY verbose fcelsb.c

ACTION: none needed.

lpfcN: 8: PRLI completes successfully

DESCRIPTION: A PRLI to a FCP target completed successfully. target PortID and FCP SCSI ID (pan,

sid) are recorded.

LOG: WARNING FCP / DISCOVERY verbose fcelsb.c

ACTION: none needed.

lpfcN: 9: FAN received

DESCRIPTION: A FAN ELS command was received from a Fabric. The assigned PortID and internal

driver state are recorded.

LOG: WARNING FCP / DISCOVERY verbose fcelsb.c

ACTION: none needed.

lpfcN: 10: RSCN received

DESCRIPTION: A RSCN ELS command was received from a Fabric. The internal driver state and size

of the RSCN payload is recorded

LOG: WARNING DISCOVERY verbose fcelsb.c

ACTION: none needed.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 34 35

Keine Kommentare

Emulex LP9802DC Bedienungsanleitung Seite 25